样品申请 | 联系我们
所有搜索
Car Diagnostic Tools
Bluetooth keyboard
Autocom CDP+
Creader VII
样品申请
联系销售
反馈
STM32F103VCT6

This STM32F103VCT6 is a performance line, ARM-based 32-bit MCU with Flash, USB, CAN, seven 16-bit timers, two ADCs and nine communication interfaces.

The STM32F103xx medium-density performance line family incorporates the high-performance ARM Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 128 Kbytes and SRAM up to 20 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer two 12-bit ADCs, three general purpose 16-bit timers plus one PWM timer, as well as standard and advanced communication interfaces: up to two I2Cs and SPIs, three USARTs, an USB and a CAN.

The devices operate from a 2.0 to 3.6 V power supply. They are available in both the –40 to +85 °C temperature range and the –40 to +105 °C extended temperature range. A comprehensive set of power-saving mode allows the design of low-power applications. The STM32F103xx medium-density performance line family includes devices in six different package types: from 36 pins to 100 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family.

Features:

•Core: ARM 32-bit Cortex™-M3 CPU
◦72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access
◦Single-cycle multiplication and hardware division
•Memories
◦256 to 512 Kbytes of Flash memory
◦20 Kbytes of SRAM
•Clock, reset and supply management
◦2.0 to 3.6 V application supply and I/Os
◦POR, PDR, and programmable voltage detector (PVD)
◦4-to-16 MHz crystal oscillator
◦Internal 8 MHz factory-trimmed RC
◦Internal 40 kHz RC with calibration
◦32 kHz oscillator for RTC with calibration
•Low power
◦Sleep, Stop and Standby modes
◦VBAT supply for RTC and backup registers
•2 x 12-bit, 1 μs A/D converters (up to 16 channels)
◦Conversion range: 0 to 3.6 V
◦Dual-sample and hold capability
◦Temperature sensor
•DMA
◦7-channel DMA controller
◦Peripherals supported: timers, ADC, SPIs, I2Cs and USARTs
•Up to 80 fast I/O ports
◦26/37/51/80 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant
•Debug mode
◦Serial wire debug (SWD) & JTAG interfaces
•7 timers
◦Three 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input
◦16-bit, motor control PWM timer with dead-time generation and emergency stop
◦2 watchdog timers (Independent and Window)
◦SysTick timer 24-bit downcounter
•Up to 9 communication interfaces
◦Up to 2 x I2C interfaces (SMBus/PMBus)
◦Up to 3 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control)
◦Up to 2 SPIs (18 Mbit/s)
◦CAN interface (2.0B Active)
◦USB 2.0 full-speed interface
•CRC calculation unit, 96-bit unique ID
•Packages are ECOPACK®
Applications:

•Motor drive
•Application control
•Medical and handheld equipment
•PC and gaming peripherals
•GPS platforms
•Industrial applications
•PLCs
•Inverters
•Printers
•Scanners
•Alarm systems
•Video intercoms
•HVACs

上一篇:STM32F103RET6
下一篇:STM32F105VCT6
返回顶部
  关于腾迈 | 产品中心 | 人力资源 | 联系我们
Copyright © 2010-2011 腾迈科技 All Rights Reserved.
粤ICP备1205279(1/3)号